Redomak Robot Teknolojileri A.S.

SPINEA GEARBOXES- ROTOSPIN SERIES

www.spineareduktor.com


 

 

 

ROTOSPIN SERIES

 

The product RotoSpin rotary module serves for the construction of facilities which are characterized in the rotary motion, speed reduction and the tilting moment transmission.  RotoSpin is installed by the highly precise TwinSpin reductor, which ensures the rotary motion without backlash, high torsional and tilting stiffness. The construction of RotoSpin ensures easy connection to the frame and comfortable clamping of movable parts to the output flange. The modularity of construction enables to connect different types of servomotors. Therefore these modules are normally produced without the drive, but with such special-purpose connecting equipment that is required by a customer for a given type of engine.

Main parts

The module RotoSpin is built on basis of the bearing reducer TwinSpin. The module can be delivered without a servomotor, with demanded connecting dimensions or with a servomotor, according to particular requirements of the client. For handling with long components the module RS-A is used in connection with the suspensory module RS-C that can be equiped by a rotary pneumatic or electrical wiring for welding currents, controlling signals.

 

ROTOSPIN A SERIES

 

 

 

 

ROTOSPIN pdf catalogue => ROTOSPIN A series =>

 

The RotoSpin rotary modules with type designation A are called flange ones. They feature a flange design, which allows the module’s attachment and building into a structure with a circular hole. According to their size, RotoSpins A are manufactured in four size categories with load capacities of 60, 250, 500, and 1000 kg respectively.

Due to their small dimensions and low weight, the RS-A modules are used mainly in moving parts of positioning devices. If the RS modules are loaded with a higher than allowed tilting moment or shock load, we use them in combination with a support bearing.

Maintenance

The rotary module does not require any special maintenance. When installing the rotary modul, observe the respective dimensional and positional tolerances of the centering diameters. The rotary module is a high-precision product, therefore it requires careful manipulation, installation, and dismounting.

Delivery Conditions

The rotary module is delivered completely assembled, without fixing screws, grease lubricated, and in a protective package.

Each rotary modul is identified with an identification plate, including the following data:

  • manufacturer
  • production type and size
  • reduction ratio
  • model
  • manufacturing number

Advantages

  •  Possibility to build into circular holes
  •  Low weigh and small dimensions
  •  Wide area of use
  •  Easy attachment

 

ROTOSPIN B SERIES

 

 

 

 

ROTOSPIN pdf product catalogue =>

 

The modules with the identification "B", so-called footing modules are of casing construction that enables simple and safe fitting of the module to the base frame. RotoSpin B is characterized in a casing shape, which enables its easy and safe connection to a frame.

Maintenance

The rotary module does not require any special maintenance. When installing the rotary modul, observe the respective dimensional and positional tolerances of the centering diameters. The rotary module is a high-precision product, therefore it requires careful manipulation, installation, and dismounting.

Delivery Conditions

The rotary module is delivered completely assembled, without fixing screws, grease lubricated, and in a protective package.

Each rotary modul is identified with an identification plate, including the following data:

  • manufacturer
  • production type and size
  • reduction ratio
  • model
  • manufacturing number


 

 

ROTOSPIN C SERIES

 

 

 

 

ROTOSPIN C pdf catalogue =>

 

The RotoSpin C rotary (support) module is used for the capturing of tilting moments during the welding of large spatial parts, for the transmission of welding current, compressed air, electrical signals, etc. The RS-C module consists of a frame, a rotary flange, a hollow shaft, a tilt bearing and a rotary welding current distribution unit. The hollow shaft allows to route compressed air and electric signal distribution lines.

Versions

The RS-C module is normally supplied with a rotary electric distribution unit for the welding current od 500 A. Upon an agreement with the manufacturer, the rotary distribution unit can be modified, or the module can be supplied without a distribution unit. The module is supplied in two versions, with feet or with a flange. The RS-C module for the horizontal or vertical axis of rotation is used as complement to the RS-A or RS-B module.

Maintenance

The rotary module does not require any special maintenance. When installing the rotary modul, observe the respective dimensional and positional tolerances of the centering diameters. The rotary module is a high-precision product, therefore it requires careful manipulation, installation, and dismounting.

Delivery Conditions

The rotary module is delivered completely assembled, without fixing screws, grease lubricated, and in a protective package.

Each rotary modul is identified with an identification plate, including the following data:

  • manufacturer
  • production type and size
  • reduction ratio
  • model
  • manufacturing number

 

2D & 3D DATA RotoSpin=> http://www.spinea.com/en/downloads

 

www.bosluksuzreduktor.com

www.robotreduktor.com

www.spineaturkiye.com

 


 

 


 

Dark


Light